Skip to main content

Security Lockdown Example

In this example we will show how to check every injection, lookup, bind and unbind operation against a set of J2SE security permissions. In order to do so we have constructed four projects who have a different set of permissions in the system. Lets take a brief glimpse of each project in the example, to get an overview of what they do and how they interact with the system.

The first project is the runner project, which is nothing more than a set of junit tests which run various scenarios, showing how security is either granted or denied to the other projects.

The next project is the system project, which is considered to be secure and trusted system code. This code will receive AllPermission and therefor is able to manipulate any object in the system and perform any action. The system code contains things like the security validation service itself, along with other secure code such as security services.

Another project is called “Alice.” Alice is an application provider that is able to access security services. Alice will not attempt to do anything bad, but will remain within the confines of the permissions granted her. However, Alice does not have AllPermission, and therefore could not perform some operations even if she tried (however, she never tries to do anything she shouldn’t).

Mallory is the last project. Mallory is another application provider, who also has some access to system resources. In fact, Mallory has access to the Alice application. Mallory usually sticks to the bounds of what he is allowed to do, but sometimes will attempt to perform operations that he is not allowed to perform. We shall see that when he attempts to do so he is rebuffed by the security operations of the system.

Lets take a look in detail at how this total security lockdown of the system occurs.

The System Project

The system project has some resources it would like to give out to some applications, but not to others. It would also like to be able to prevent applications from binding or unbinding services from the service registry (embodied by the ServiceLocator.

In order to do this, the system project must decide on a protection scheme. Therefore the decision is made that only code with java.lang.AllPermission shall be able to bind or unbind services. In order to protect lookup and injection services the decision is made to use the java.lang.RuntimePermission called “accessClassInPackage”. This permission is used to allow code to access classes in a particular package, and so seems appropriate for also protecting services that are from that particular package.

It should be noted that the above decisions were made arbitrarily for this example, and real system code can use whatever permission scheme it desires, including creating and using its own Permission classes.

Lets first take a look at the resource that the system project would like to protect. You will see in the package “org.acme.security” that there is a service called AuditService. AuditService is an extremely simple secure auditing service. The system code would like to allow some applications access to this service, and other applications to NOT be allowed to directly use this service. It should be noted that the code that CAN access the service may be able to use that service on behalf of the callers of that service. That sort of thing will all work according to the normal J2SE security model. Here is the AuditService, a service that should be protected:

@Service @Singleton
public class AuditService {
    ...
}

The most important thing to notice about this service is that there is nothing at all special about it. It is not annotated with any sort of special annotation or indication that it is a secure or protected service. This is because in some environments this service may be protected, while in other environments it may not be protected. It is up to the environment to decide which resources need to be protected, and which do not. In this way the burden of deciding which resources are to be protected and which are not are taken away from the developers of the resource and put into the hands of the definition of the particular environment in which those resources run. This is a good thing, as it puts the burden of deciding which resources are to be protected into the hands of those who can better make that decision.

But how does the environment decide which resources are protected, and which are not? In HK2 the answer is a system defined service called the ValidationService. The ValidationService has two functions. The first function is to decide which resources should be protected. The second is to provide code that must be run in order to protect the resources which are protected.

In this example, the system has decided that every resource must be protected. Hence the name “security-lockdown” example. Every injection point, lookup and bind will first run through a Validator to decide whether or not that operation should be allowed to proceed. But before the Validator is run on anything first the ValidationService must tell the system that all resources are to be protected.

In order to do this the system project must implement the ValidationService. In doing so it must implement the getLookupFilter API, which returns a Filter to the system. The system will use this filter to determine which resources are protected. If the filter returns true about any resource, then that resource will have the Validator run over it whenever it is looked up or injected. Note that bind and unbind operations are always run through all registered validators, as these operations are rare and can have serious effects on the state of the system.

In our example, where we want to protect every resource, we implement the getLookupFilter in this way:

@Service @Singleton
public class ValidationServiceImpl implements ValidationService {
    ...
    
    @Override
    public Filter getLookupFilter() {
        return BuilderHelper.allFilter();
    }
    
    ...
}

TheBuilderHelper allFilter method returns a Filter that always returns true. In this way we have assured that every lookup and injection in the system will be run through the implementation of Validator, which is also returned by out implementation of ValidationService:

@Service @Singleton
public class ValidationServiceImpl implements ValidationService {
    private final ValidatorImpl validator = new ValidatorImpl();
    
    ...

    @Override
    public Validator getValidator() {
        return validator;
    }
}

Note that since the ValidationService is a Singleton service that the ValidatorImpl will only be created once, and the same one will be returned to the system every time the getValidator method is called.

However, the most important thing about the system code is how it protects the resources it has been charged to protect. That is the job of the ValidatorImpl. The ValidatorImpl is responsible for determining how to validate the BIND, UNBIND and LOOKUP operations. Here is the implementation of the Validator validate method:

public class ValidatorImpl implements Validator {
    ...
    
    @Override
    public boolean validate(ValidationInformation info) {
        switch(info.getOperation()) {
        case BIND:
        case UNBIND:
            return validateBindAndUnbind();
        case LOOKUP:
            return validateLookup(info.getCandidate(), info.getInjectee());
        default:
            return false;
        }
    }
    
    ...
    
}

It is very important to understand the context in which these calls are made. In that way it can be determined how to check the permission being granted. In the BIND, UNBIND, and in any LOOKUP that is not an injection the call frame will be the Java protection domain to check. In the case of the BIND and UNBIND operations this will include the code that called commit on the DynamicConfiguration. In the case of the non-inject lookup, this will contain the user that is attempting to look up a service.

Since the BIND and UNBIND cases are fairly strait-forward in our example, lets see how this permission check is performed. First, we make a checkPermission call that returns true or false depending on whether or not the permission is granted or not. Here it is:

    private static boolean checkPerm(Permission p) {
        try {
            AccessController.checkPermission(p);
            return true;
        }
        catch (AccessControlException ace) {
            return false;
        }
    }

This converts any AccessControlException (an indication that the permission was NOT granted) into a simple false value. Otherwise, if the checkPermission call is successful this method will return true. It should be noted that using the checkPermission in this way will only work properly when the code to be checked is on the call stack, and that every piece of code on the call-stack must have the permission being asked for. For the BIND and UNBIND operations then, the check is easy, since the caller is on the stack and this method is easy to use:

    private boolean validateBindAndUnbind() {
        return checkPerm(new AllPermission());
    }

This is very simple and ensures that anyone who tries to BIND or UNBIND service descriptions into the system must have AllPermission!

Now lets talk about the LOOKUP case. The LOOKUP case can be broken down into two cases, the LOOKUP via an API case and the injection case. Both are doing a lookup of a service. However in the first case (pure lookup) the caller is directly on the stack. In the second case there may be no other software on the stack other than the system software. Therefore in that case more information may be needed in order to perform our security check. That extra information comes in the form of the [Injectee][injectee]. Using the combination of the candidate ActiveDescriptor and the place that descriptor would be injecting into (the [Injectee][injectee]) a security decision can be made about the injection point.

Lets look at the method that handles the both LOOKUP cases:

    private boolean validateLookup(ActiveDescriptor<?> candidate, Injectee injectee) {
        if (injectee == null) {
            return validateLookupAPI(candidate);
        }
        
        return validateInjection(candidate, injectee);
    }

As you can see from the above code, the lookup has been broken into two cases, the lookup with the API case, and the lookup based on the injection point case. The lookup with the API case is similar to the BIND and UNBIND cases, since the permission check simply goes against the current call stack.

Before we look at how validateLookupAPI is implemented, lets look at how we create the set of permissions that are necessary for the caller to be allowed to use the lookup API. Firstly, we create a RuntimePermission for a particular package by calling this method:

    private final static String ACCESS_IN_PACKAGE = "accessClassInPackage.";
    
    private static Permission getLookupPermission(String packName) {
        RuntimePermission retVal = new RuntimePermission(ACCESS_IN_PACKAGE + packName);
        
        return retVal;
    }

The above code will create the Permission that needs to be checked to see if the caller should have access to the passed in package.

When dealing with an ActiveDescriptor, we want to be sure that the caller has the right to access all of the contracts which that service advertises. Hence we create a method that returns all of the permissions that must be checked based on all of the contracts that the ActiveDescriptor advertises. Here is the implementation of a method that returns a list of all permissions that must be allowed in order to access that ActiveDescriptor:

    private static List<Permission> getLookupPermissions(ActiveDescriptor<?> ad) {
        LinkedList<Permission> retVal = new LinkedList<Permission>();
        
        for (String contract : ad.getAdvertisedContracts()) {
            int index = contract.lastIndexOf('.');
            String packName = contract.substring(0, index);
            retVal.add(getLookupPermission(packName));
        }
        
        return retVal;
    }

Forearmed with the above methods, we can now look at how the method which checks whether or not the lookup should be authorized. Here is the implementation of validateLookupAPI:

    private boolean validateLookupAPI(ActiveDescriptor<?> candidate) {
        List<Permission> lookupPermissions = getLookupPermissions(candidate);
     
        for (Permission lookupPermission : lookupPermissions) {
            if (!checkPerm(lookupPermission)) {
                if (VERBOSE) {
                    System.out.println("candidate " + candidate +
                        " LOOKUP FAILED the security check for permission " + lookupPermission);
                }
                return false;
            }
        }
        
        return true;
    }

This is a strait-forward implementation, simply ensuring with the checkPerm call that the caller is allowed to access all of the contracts offered by the given candidate ActiveDescriptor.

That leaves us with the case of the lookup being performed on behalf of an injection point. This sort of lookup might be done because of some system code, or on the behalf of a chain of instantiations being done due to a dependency chain. Hence, it may not be the case that the proper protection domain is on the calling stack. So in this case we must use the protection domain of the injection point in order to see whether or not the code representing the injection point itself has the proper permissions.

Here is the implementation of the validateInjection method:

    private boolean validateInjection(ActiveDescriptor<?> candidate, Injectee injectee) {
        List<Permission> lookupPermissions = getLookupPermissions(candidate);
        
        // If this is an Inject, get the protection domain of the injectee
        final Class<?> injecteeClass = injectee.getInjecteeClass();
        
        ProtectionDomain pd = AccessController.doPrivileged(new PrivilegedAction<ProtectionDomain>() {

            @Override
            public ProtectionDomain run() {
                return injecteeClass.getProtectionDomain();
            }
            
        });
        
        for (Permission lookupPermission : lookupPermissions) {
            if (!pd.implies(lookupPermission)) {
                if (VERBOSE) {
                    System.out.println("candidate " + candidate + " injectee " + injectee +
                        " LOOKUP FAILED the security check for " + lookupPermission);
                }
                
                return false;
            }
        }
        
        return true;
    }

This method first gets the set of permissions that the protection domain must have using the getLookupPermissions method. It then gets the ProtectionDomain of the injectee by getting the ProtectionDomain from the Class of the injection point. It should be noted that getting the ProtectionDomain from the Class is itself a priviliged operation, and hence must be done inside a doPrivileged block, in order to ensure that only the rights of the system software are checked when getting the protection domain.

The code then runs through the list of permissions that the ProtectionDomain of the [Injectee][injectee] must have in order for the injection to use an object produced by the ActiveDescriptor.

This is the entire implementation of the security-lockdown validator, which will ensure that only those that have the rights to specific packages will be able to inject or lookup services from those packages, and that only those who have AllPermission will be able to bind or unbind services from the system.

Note that the System Project has the following grant:

grant codeBase "file:${build.dir}/../../system/target/-" {
  permission java.security.AllPermission;
};

Now lets take a closer look at Alice and Mallory.

Alice

Alice is a simple application that has a limited set of privileges. Here are the exact priviliges that Alice is granted:

grant codeBase "file:${build.dir}/../../alice/target/-" {
  permission java.lang.RuntimePermission "accessClassInPackage.javax.inject";
  permission java.lang.RuntimePermission "accessClassInPackage.com.alice.application";
  permission java.lang.RuntimePermission "accessClassInPackage.org.jvnet.hk2.annotations";
  permission java.lang.RuntimePermission "accessClassInPackage.org.acme.security";
};

One thing that will distinguish Alice from Mallory is that Alice has access to the org.acme.security package, whereas Mallory does not. The means that Alice can inject the org.acme.security.AuditService into its services, while Mallory cannot. Here is the very simple AliceApp, which injects the AuditService:

@Service @Singleton
public class AliceApp {
    @Inject
    private AuditService auditor;
    
    /**
     * This service makes use of the auditor service directly, which
     * should be allowed as Alice itself has the ability to use the
     * audit service
     * 
     * @param fromMe
     */
    public void doAuditedService(String fromMe) {
        auditor.auditLog("Alice performed an audit for " + fromMe);
    }
}

The injection point for the AuditService will pass the validator code because Alice has access to org.acme.service package. Now lets look at Mallory.

Mallory

Mallory is another application, but unlike Alice, Mallory will sometimes attempt to do things which it is not allowed to do. Since Mallory is less trusted by the administrator, Mallory has different grants:

grant codeBase "file:${build.dir}/../../mallory/target/-" {
  permission java.lang.RuntimePermission "accessClassInPackage.javax.inject";
  permission java.lang.RuntimePermission "accessClassInPackage.com.mallory.application";
  permission java.lang.RuntimePermission "accessClassInPackage.com.alice.application";
  permission java.lang.RuntimePermission "accessClassInPackage.org.jvnet.hk2.annotations";
  permission java.lang.RuntimePermission "accessClassInPackage.org.glassfish.hk2.api";
};

Note that Mallory does NOT have access to the org.acme.security package, and hence should not be able to inject or lookup anything from that package.

Note that sometimes Mallory acts according to the rules, and other times he acts against the rules. Lets look at the times Mallory acts according to the rules:

@Service
public class MalloryApp {
    @Inject
    private AliceApp alice;
    
    @Inject
    private ServiceLocator locator;
    
    ...
    
    public void doAnApprovedOperation() {
        alice.doAuditedService("Mallory");
    }
    
    ...
}

Mallory injects both the ServiceLocator itself as well as the AliceApp. Since Mallory has been granted those rights, these injections are Validated by the Validator and found to be perfectly OK. Hence this service can properly be instantiated.

Now lets see what Mallory might try to do that it shouldn’t. In this case, Mallory attempts to look up the AuditService, which he should not be allowed to do:

    /**
     * Mallory cannot however lookup the AuditService himself!
     */
    public void tryToGetTheAuditServiceMyself() {
        Object auditService = locator.getBestDescriptor(BuilderHelper.createContractFilter(
            "org.acme.security.AuditService"));
        auditService.toString();  // This should NPE!
    }

Note that in this code that tricky fellow Mallory used a pure string representation of the fully qualified class name of the AuditService, since the system would not have allowed him access to the AuditService otherwise. The code above will NPE when the auditService.toString() method is called. As far as this lookup is concerned, it acts as though there is no AuditService to be had, rather than throwing some other form of exception (which might tell Mallory something about the system).

In this method, Mallory will attempt to advertise a service:

    /**
     * Mallory cannot advertise the EvilService
     */
    public void tryToAdvertiseAService() {
        DynamicConfigurationService dcs = locator.getService(DynamicConfigurationService.class);
        DynamicConfiguration config = dcs.createDynamicConfiguration();
        
        config.addActiveDescriptor(EvilService.class);
        
        config.commit();  // This will throw a MultiException
    }

Since Mallory does not have the rights to advertise a service the commit call will throw an exception.

In this method, Mallory will attempt to unadvertise the ServiceLocator itself!!! That can’t be allowed, or the very fabric of space-time could be threatened:

    /**
     * Mallory cannot un-advertise ServiceLocator!
     */
    public void tryToUnAdvertiseAService() {
        final Descriptor locatorService = locator.getBestDescriptor(
            BuilderHelper.createContractFilter(ServiceLocator.class.getName()));
        
        // This filter matches ServiceLocator itself!
        Filter unbindFilter = new Filter() {

            @Override
            public boolean matches(Descriptor d) {
                if (d.getServiceId().equals(locatorService.getServiceId())) {
                    if (d.getLocatorId().equals(locator.getLocatorId())) {
                        return true;
                    }
                }
                
                return false;
            }
            
        };
        
        DynamicConfigurationService dcs = locator.getService(DynamicConfigurationService.class);
        DynamicConfiguration config = dcs.createDynamicConfiguration();
        
        config.addUnbindFilter(unbindFilter);
        
        config.commit();  // This will throw a MultiException
    }

Again, since Mallory does not have the right to unbind services from the registry, the commit method will throw an exception and the entire operation will fail.

In the next act of evil that Mallory attempts to perpetrate, it will try to instantiate this service:

@Service @Singleton
public class EvilInjectedService {
    @Inject
    private AuditService auditor;
    
    public EvilInjectedService() {
        throw new AssertionError("This should never get called since AuditService is not available");
    }

}

In this case Mallory is not doing a direct API lookup of the AuditService, but rather the EvilInjectedService is trying to simply inject the service into itself, hoping that this mode of access would be allowed. Unfortunately, Mallory has no such luck in this method of MalloryApp:

    /**
     * Tries to instantiate a service with an illegal injection point
     */
    public void tryToInstantiateAServiceWithABadInjectionPoint() {
        locator.getService(EvilInjectedService.class);  // Will throw MultiException
    }

In this case the system will attempt to instatiate the EvilInjectedService and will fail, since the EvilInjectedService does not have the rights to inject the AuditService.

That’s it for Mallory! Mallory was allowed to perform the operations he was allowed to perform, and was not allowed to perform the operations for which it does not have the proper set of priviliges.

The last project in the example is the runner.

The Runner Project

The Runner project runs a set of junit tests that ensures that the System project, the Alice project and the Mallory project runs as expected. The test case ensures that both the AliceApp and MalloryApp come up, and that when Mallory tries to do things that he should not do that he is properly rebuffed. The most interesting thing in the Runner project is in the pom.xml, which gives the information that is needed to run the security-lockdown example with the java security manager enabled. This is from the pom.xml:

<plugin>
  <groupId>org.apache.maven.plugins</groupId>
  <artifactId>maven-surefire-plugin</artifactId>
  <configuration>
    <argLine>-Dlocal.repo=${settings.localRepository}
             -Dbuild.dir=${project.build.directory}
             -Djava.security.manager
             -Djava.security.policy=${project.build.directory}/test-classes/policy.txt
    </argLine>
    <!-- -Djava.security.debug=access,failure,domain -->
    </configuration>
</plugin>

The other interesting file in the Runner project is the policy.txt, which gives the full set of grants necessary to run this test properly.

Conclusion

This example shows how a secure system can be built in HK2 given the tools provided. In a real use case other decisions can be made about how to validate the operations being performed. This example is here to illustrate how those decisions can be put into effect, not what those decisions should be.

Back to the top